Ceiling U Profile

Aypan ceiling U profiles are used for forming metal bearing framework at internal space curtain walls and suspended ceiling applications. It is screwed to the wall at suspended ceiling level during suspended ceiling construction, and serves as both level arranger and balancer. During curtain wall construction, it is applied at locations, where system joints with ground and ceiling.

• It is made up of hot dip galvanized 0,50 and 0,60 mm thick carbon steel sheets by means cold forming method in order to prevent corrosion.

• Minimum galvanize thickness is 110 - 122 g/m2.

• There are lengthwise channels in order to maintain strength.

• Its surface is perforated for maintaining installation easiness.

• Complies with TS EN 14195 (Metal Framework Components, Used on Gypsum Plate Systems) standard.

Ceiling C Profile

Aypan ceiling C profiles are used for forming metal bearing framework at internal space curtain walls and suspended ceiling applications. It forms main bearing system or lower screwing surface with instating one side into ceiling U profile during suspended ceiling construction. During curtain wall construction, it is instated between ceiling U profiles, and gypsum plate is screwed to single surface of the profile.

• It is made up of hot dip galvanized 0,50 and 0,60 mm thick carbon steel sheets by means cold forming method in order to prevent corrosion.

• Minimum galvanize thickness is 110 - 122 g/m2.

• There are lengthwise channels in order to maintain strength.

• Its surface is perforated for maintaining installation easiness.

• Complies with TS EN 14195 (Metal Framework Components, Used on Gypsum Plate Systems) standard.

Wall U Track

Aypan Wall U Tracks are used for forming metal bearing framework at internal space curtain wall and shaft wall applications. It is applied at locations, where system joints with ground and ceiling. During section wall construction, gypsum plate is screwed to both sides of profiles and to single side for curtain wall construction.

• It is made up of hot dip galvanized 0,50 and 0,60 mm thick carbon steel sheets by means cold forming method in order to prevent corrosion.

• Minimum galvanize thickness is 110 - 122 g/m2.

• There are lengthwise channels in order to maintain strength.

• Its surface is perforated for maintaining installation easiness.

• Complies with TS EN 14195 (Metal Framework Components, Used on Gypsum Plate Systems) standard.

Wall C Stud

Aypan Wall C Studs are used for forming metal bearing framework at internal section wall, space curtain wall and shaft wall applications. It is applied with instating between wall U profiles. During section wall construction, gypsum plate is screwed to both sides of profiles with instating between wall U profiles, and to single side for curtain wall construction.

• It is made up of hot dip galvanized 0,50 and 0,60 mm thick carbon steel sheets by means cold forming method in order to prevent corrosion.

• Minimum galvanize thickness is 110 - 122 g/m2.

• There are lengthwise channels in order to maintain strength.

• Its surface is perforated for maintaining installation easiness.

• Complies with TS EN 14195 (Metal Framework Components, Used on Gypsum Plate Systems) standard.

Perforated Cornet Bead (90 degree)

Aypan perforated corner bead profiles are used for maintaining smoothness of edge crossings at gypsum plaster application phase of wall and suspended ceiling applications. It serves as a guide for clean and smooth completion of performed application and increases resistance against impacts.

• It is made up of hot dip galvanized 0,35 mm thick carbon steel sheets by means cold forming method in order to prevent corrosion.

• Minimum galvanize thickness is 110 - 122 g/m2.

• Its zinc cover does not fall when folded.

• Its surface is perforated for maintaining adherence.

• Complies with TS EN 14195 (Metal Framework Components, Used on Gypsum Plate Systems) standard.

Plaster Corner Bead

Aypan plaster corner bead profiles are used for maintaining smoothness of edge crossings at machine gypsum plaster application phase on internal space surfaces, such as brick, gross concrete and bims block. It serves as a guide for clean and smooth completion of performed application and increases resistance against impacts.

• It is made up of hot dip galvanized 0,40 mm thick carbon steel sheets by means cold forming method in order to prevent corrosion.

• Minimum galvanize thickness is 110 - 122 g/m2.

• Its zinc cover does not fall when folded.

• Its surface is perforated for maintaining adherence.

• Complies with TS EN 14195 (Metal Framework Components, Used on Gypsum Plate Systems) standard.